Power Computing PowerBase Low-Profile User Manual Download Page 93

Page: 93 / 240

Installing PCI Expansion Cards

For Technical Support, Call 1-800-708-6227

PowerCenter Pro User’s Guide

4. Gently place it on its left (as viewed from the rear) side and rotate it

so that the base faces you.

5. If you have a Minitower chassis, remove the four Phillips-head

screws from the corners of the base and put them where you will be
able to find them later.

These Phillips-head screws are for the base only; don’t use the Phillips
screws for the cover, or the thumb screws for the base.

6. Remove the Minitower base and set it aside.

base

Phillips-
head screws

5 Install card Page 63 Friday, June 6, 1997 9:51 AM

Summary of Contents for PowerBase Low-Profile

















































































































































































































































Search results

Summary of Contents for PowerBase Low-Profile

Reviews:

Brands by name

Popular brands

Power Computing PowerBase Low-Profile, User Manual

Search results

Summary of Contents for PowerBase Low-Profile

Reviews:

Brands by name

Popular brands