Porsche 911 CARRERA 4 - Owner'S Manual Download Page 99

Page: 99 / 355

Instrument Illumination

Function

The illumination is automatically adjusted to the

ambient brightness by the light sensor in the

tachometer.
In addition, when the car lights are switched on, the

instrument and switch symbol brightness can be

manually adjusted.

Warning!

Risk of loss of control or an accident, resulting

in serious personal injury or death.

Do not reach through the steering-wheel

spokes while driving.

Note

When the car lights are switched on, the instrument

lighting for light dials switches on and off automati-

cally depending on the ambient brightness.

Dimming instrument illumination

Turn adjustment button

in the appropriate

direction and hold it until the desired bright-

ness has been reached.

The chosen level of brightness is indicated by

a bar display in the display field of the on-board

computer.

Controls, Instruments

Summary of Contents for 911 CARRERA 4 -




































































































































































































































































































































































Search results

Summary of Contents for 911 CARRERA 4 -

Reviews:

Brands by name

Popular brands

Porsche 911 CARRERA 4 -, Owner'S Manual

Search results

Summary of Contents for 911 CARRERA 4 -

Reviews:

Brands by name

Popular brands