Porsche 911 CARRERA 4 - Owner'S Manual Download Page 76

Page: 76 / 355

Brake pads

Wear on the brake pads and brake discs depends

to a great extent on the driving style and the condi-

tions of use and therefore cannot be expressed in

actual miles on the road.
The high-performance brake system is designed

for optimal braking effect at all speeds and

temperatures. Certain speeds, braking forces

and ambient conditions (such as temperature and

humidity) therefore might cause “brake noises”.

New brake pads or linings

New brake pads and brake discs have to be

“broken in”, and therefore only attain optimal

friction when the car has covered several hundred

miles or km. The slightly reduced braking ability

must be compensated for by pressing the brake

pedal harder. This also applies whenever the brake

pads and brake discs are replaced.

Controls, Instruments

Summary of Contents for 911 CARRERA 4 -




































































































































































































































































































































































Search results

Summary of Contents for 911 CARRERA 4 -

Reviews:

Brands by name

Popular brands

Porsche 911 CARRERA 4 -, Owner'S Manual

Search results

Summary of Contents for 911 CARRERA 4 -

Reviews:

Brands by name

Popular brands