Porsche 911 CARRERA 4 - Owner'S Manual Download Page 52

Page: 52 / 355

Safety belt height adjustment (Coupc and
Targa)

Adjusting belt height

The height of the belt deflectors for the driver’s

seat and passenger’s seat can be adjusted. Adjust

the height of the safety belt so that it runs across

the middle of the shoulder, not against the neck.

Upward - push belt deflector up.
Downward - press button (

arrow

) and move

belt deflector.

Cleaning the safety belts

If it becomes necessary to clean the belts, you can

use any mild washing agent. Allow the belts to dry

prior to retracting, but avoid direct sunlight.

Only use suitable cleaners. If unsuitable

cleaners are used or any attempt is made

to dye or bleach the belts, the webbing may be

weakened and thus constitute a safety risk.

Controls, Instruments

Summary of Contents for 911 CARRERA 4 -




































































































































































































































































































































































Search results

Summary of Contents for 911 CARRERA 4 -

Reviews:

Brands by name

Popular brands

Porsche 911 CARRERA 4 -, Owner'S Manual

Search results

Summary of Contents for 911 CARRERA 4 -

Reviews:

Brands by name

Popular brands