Porsche 911 CARRERA 4 - Owner'S Manual Download Page 30

Page: 30 / 355

Central locking button

The central locking button on the dashboard lets

you lock and unlock both doors electrically.

Note

If the doors are locked with the key or remote

control, they cannot be opened by pressing the

central locking button.

Locking

Press the central locking button. Indicator light

in the button lights up if ignition is on.

Unlocking

Press the central locking button. Indicator light

goes out.

If the doors were locked with the central locking

button, they can be opened by pulling the inner

door handle:
1. Pull inner door handle once to unlock door

lock.

2. Pull inner door handle again to open door.

Automatic door locking

Your authorized Porsche dealer can program

diverse types of automatic door locking in the

control unit of the central locking system:

Type 1

Doors lock automatically when the ignition is

switched on.

Type 2

Doors lock automatically when a speed of 3 mph -

6 mph (5 km/h - 10 km/h) is exceeded.

Type 3

Doors lock automatically when the ignition is

switched on. If doors are opened with the engine

running, they lock again automatically when a

speed of 3 mph - 6 mph (5 km/h - 10 km/h) is

exceeded.

Type 4

The doors do not lock automatically.

Note

Automatically locked doors can be unlocked with

the central locking button or opened by pulling on

the inside door handle twice.
On vehicles with the Sport Chrono Package Plus,

the PCM can be used to activate automatic door

locking. Please observe the chapter “Individual

Controls, Instruments

Summary of Contents for 911 CARRERA 4 -




































































































































































































































































































































































Search results

Summary of Contents for 911 CARRERA 4 -

Reviews:

Brands by name

Popular brands

Porsche 911 CARRERA 4 -, Owner'S Manual

Search results

Summary of Contents for 911 CARRERA 4 -

Reviews:

Brands by name

Popular brands