Porsche 911 CARRERA 4 - Owner'S Manual Download Page 286

Page: 286 / 355

- Rear jacking point

Caution!

Serious personal injury or death and/or

serious damage to the engine or the vehicle

may occur, if you lift the vehicle improperly.

Never lift the vehicle at any other place than

the jacking points.
Never lift the vehicle by the engine, transmis-

sion or axles.

Do not damage any sensitive components in

the vicinity of the jacking points.

Platform lift

Before the car is driven on to a lifting platform,

it must be ensured that there is enough space

between the lifting platform and the vehicle.

Garage lift

A garage lift may be used

only

at the illustrated

jacking points.

284

Practical Tips, Emergency Service

Summary of Contents for 911 CARRERA 4 -




































































































































































































































































































































































Search results

Summary of Contents for 911 CARRERA 4 -

Reviews:

Brands by name

Popular brands

Porsche 911 CARRERA 4 -, Owner'S Manual

Search results

Summary of Contents for 911 CARRERA 4 -

Reviews:

Brands by name

Popular brands