Porsche 911 CARRERA 4 - Owner'S Manual Download Page 243

Page: 243 / 355

with the change intervals stated in the brochure

“Maintenance”.

Warning lights

Indication

Warning light USA

Warning light Canada

–

The warning lights on the instrument panel

and on the on-board computer indicate an

insufficient brake fluid level.

–

If the warning light lights up on the instrument

panel and the warning message appears on

the on-board computer in combination with a

larger pedal travel, a brake circuit may have

failed.

If the warning lights should light up when
driving:

Stop immediately in a suitable place.
Do not continue driving. Consult an authorized

Porsche dealer.

Maintenance, Car Care

241

Summary of Contents for 911 CARRERA 4 -




































































































































































































































































































































































Search results

Summary of Contents for 911 CARRERA 4 -

Reviews:

Brands by name

Popular brands

Porsche 911 CARRERA 4 -, Owner'S Manual

Search results

Summary of Contents for 911 CARRERA 4 -

Reviews:

Brands by name

Popular brands