Porsche 911 CARRERA 4 - Owner'S Manual Download Page 178

Page: 178 / 355

Closing luggage compartment lid and
engine compartment lid

Lower the lid and close it.
Push the lid closed with the palm of your hand

in the area of the lock. Check that the lid has

correctly engaged in the lock.

Warning!

Risk of loss of control or an accident, resulting

in serious personal injury or death.

Should you notice at any time while driving that

one of the lids is not secured properly, please

stop immediately in a suitable place and close

it. The front lid may fly up impairing vision.

176

Controls, Instruments

Summary of Contents for 911 CARRERA 4 -




































































































































































































































































































































































Search results

Summary of Contents for 911 CARRERA 4 -

Reviews:

Brands by name

Popular brands

Porsche 911 CARRERA 4 -, Owner'S Manual

Search results

Summary of Contents for 911 CARRERA 4 -

Reviews:

Brands by name

Popular brands