Porsche 911 CARRERA 4 - Owner'S Manual Download Page 214

Page: 214 / 355

1. Insert the Allen key again. Turn in the direction

of arrow

“close”

until you can feel marked

resistance and the convertible top is complete-

ly locked.

2. Remove the Allen key.

Mounting the plastic lid

Push the plastic lid over the convertible top

locking mechanism from behind. The lid must

engage centred in the guide

. Push the lid

upwards at its front edge and engage.

Warning!

Risk of injury in an accident.

Do not drive without the plastic lid mounted.

Closing the convertible-top compartment lid

Warning!

Risk of pinching when closing the convertible-

top compartment lid.

Place your hands on the convertible-top

compartment lid when pushing.

1. Stand behind the vehicle.
2. Grasp the convertible-top compartment

lid above the brake light and push forward

against resistance which can be felt until it is

completely closed.

212

Mobile Roofs

Summary of Contents for 911 CARRERA 4 -




































































































































































































































































































































































Search results

Summary of Contents for 911 CARRERA 4 -

Reviews:

Brands by name

Popular brands

Porsche 911 CARRERA 4 -, Owner'S Manual

Search results

Summary of Contents for 911 CARRERA 4 -

Reviews:

Brands by name

Popular brands