Porsche 911 CARRERA 4 - Owner'S Manual Download Page 293

Page: 293 / 355

Store spacer and wheel nuts together.

Mounting the spacers

1. Remove wheel.
2. Fit the spacer with the wheel bolts

used to

fasten the wheel. Initially tighten the wheel

bolts slightly in diagonally opposite sequence.

3. Tighten wheel bolts in diagonally oppo-

site sequence. Tightening torque:

130 Nm (96 ftlb.).

4. Fit wheel. To do this use the original wheel nuts

for fastening the wheels. Tightening torque:

130 Nm (96 ftlb.)

Please observe the chapter ”CHANGING A

WHEEL” on page 287.

On request, separate anti-theft protection for the

wheel nuts can be mounted.

Please consult an authorized Porsche dealer.

Practical Tips, Emergency Service

291

Summary of Contents for 911 CARRERA 4 -




































































































































































































































































































































































Search results

Summary of Contents for 911 CARRERA 4 -

Reviews:

Brands by name

Popular brands

Porsche 911 CARRERA 4 -, Owner'S Manual

Search results

Summary of Contents for 911 CARRERA 4 -

Reviews:

Brands by name

Popular brands