Porsche 911 CARRERA 4 - Owner'S Manual Download Page 306

Page: 306 / 355

Headlights

General information

Caution!

Risk of damage to headlights due to abrasion

and excessive temperatures.

Do not affix any coverings (e.g. “stone guards”

or films) in the area of the headlights.

Note

The headlights can mist up depending on the

temperature and humidity.

To ensure optimum ventilation, do not cover

the gap between headlight and body (e.g.

“stone guards” or films).

Removing headlights

1. Unscrew plastic nut

. Detach the side

carpeting.

2. Remove rubber plug

from the unlocking

opening.

304

Practical Tips, Emergency Service

Summary of Contents for 911 CARRERA 4 -




































































































































































































































































































































































Search results

Summary of Contents for 911 CARRERA 4 -

Reviews:

Brands by name

Popular brands

Porsche 911 CARRERA 4 -, Owner'S Manual

Search results

Summary of Contents for 911 CARRERA 4 -

Reviews:

Brands by name

Popular brands