manualshive.com logo in svg

Polycom RealPresence Group Series, Administrator'S Manual

Share
Download
Polycom RealPresence Group Series Administrator'S Manual Download Page 96

 

Microphones and Speakers

Polycom, Inc. 

96

 

 

 

Audio Input Settings

The RealPresence Group 300 system has no audio input settings, and the settings for the RealPresence 
Group 310, 500, and 700 systems are quite different. The following tables describe each.

RealPresence Group 310 and 500 Audio Input Settings

RealPresence Group 700 Audio Input Settings

Setting

Description

Type

Displays the 3.5mm connector for line-level stereo audio input.

Audio Input Level

Sets the 3.5 mm audio input level.

Use Input for 
Microphone

Specifies use of the 3.5mm input.

When enabled, this setting is used as an audio input for external equipment. The 
audio is only heard on the far-end sites. When the local mute is activated, this input 
is muted.

When disabled, the port is used as an audio content port. The audio is heard by both 
the near and far-end sites and is not controlled by the local mute. 

Associate with Video 
Content Ports

When enabled, the 3.5 mm audio input is only heard when the VGA or HDMI content 
video port is active.

When disabled, audio is not controlled by content video port activities.

Echo Canceller

Specifies whether to use the system’s built-in echo canceller for that audio input. This 
setting is available only when the Use Input for Microphone setting is enabled.

Audio Meter (not labeled)

Displays the audio level for the 3.5 mm input port, left and right channels. 

Type

Displays embedded audio from the HDMI connector.

Audio Input Level

Sets the audio input level.

Audio Meter (not labeled)

Displays the audio level for the HDMI input port, left and right channels.

Setting

Description

Type

Displays Line (dual RCA, auxiliary audio input).

Audio Input Level

Sets the audio input level.

Echo Canceller

Specifies whether to use the system’s built-in echo canceller for that audio input. This 
setting is available only when the Use Input for Microphone setting is enabled.

Audio Meter (not labeled)

Displays the audio level of the line input, left and right channels. 

Type

Displays 3.5 mm (line-level stereo audio input, associated with HD15/VGA video 
input 3).

Audio Input Level

Sets the audio input level.

Audio Meter (not labeled)

Displays the audio level of the line input, left and right channels. 

Summary of Contents for RealPresence Group Series





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands