Polycom RealPresence Group Series Page 164 Administrator'S Manual Download

Page: 164 / 276

Manage the System Remotely

Polycom, Inc.

164



Download MIB

Set Up SNMP Management

To configure the RealPresence Group system for SNMP Management:

In the web interface, go to Admin Settings > Servers > SNMP.

Configure these settings on the SNMP screen, then click Save.

Setting

Description

Enable SNMP

Allows administrators to manage the system remotely using SNMP.

Enable Legacy
Notifications

Supports sending notifications that are compatible with the legacy MIB.

Enable New
Notifications

Supports sending notifications that are compatible with the new MIB.

Version1

Enables the use of the SNMPv1 protocol.

Version2c

Enables the use of the SNMPv2c protocol.

Version3

Enables the use of the SNMPv3 protocol.

You must select this setting to use the subsequent settings that apply only to SNMPv3.

Read-Only
Community

Specifies the SNMP management community in which you want to enable this system. The
default community is

public

Note: Polycom does not support SNMP write operations for configuration and provisioning;
the read-only community string is used for both read operations and outgoing SNMP traps.

Contact Name

Specifies the name of the person responsible for remote management of this system.

Location Name

Specifies the location of the system.

System Description

Specifies the type of video conferencing device.

User Name

Specifies the SNMPv3 User Security Model (USM) account name that will be used for
SNMPv3 message transactions. The maximum length is 64 characters.

Authentication
Algorithm

Specifies the type of SNMPv3 authentication algorithm used:

•

SHA

•

MD5

Authentication
Password

Specifies the SNMPv3 authentication password. The maximum length is 48 characters.

Privacy Algorithm

Specifies the type of SNMPv3 cryptography privacy algorithm used:

•

CFB-AES128

•

CBC-DES

Privacy Password

Specifies the SNMPv3 privacy (encryption) password. The maximum length is 48
characters.

Summary of Contents for RealPresence Group Series





















































































































































































































































































Search results

Summary of Contents for RealPresence Group Series

Reviews:

Related manuals for RealPresence Group Series

Brands by name

Popular brands

Polycom RealPresence Group Series, Administrator'S Manual

Search results

Summary of Contents for RealPresence Group Series

Reviews:

Related manuals for RealPresence Group Series

Brands by name

Popular brands