Microphones and Speakers
Polycom, Inc.
92
Left and right channel assignments depend on the settings that you select on the Stereo Settings screen. If
Autorotation is enabled for a microphone, the system automatically assigns active channels for the
microphone. Make sure that microphones with Autorotation disabled are oriented as shown in the following
illustration.
Microphone placement
After you place the microphones, you will need to configure the system to send stereo as described in
Stereo
Settings
.
Audio Output
You must connect at least one speaker to the Polycom RealPresence Group systems in order to hear audio.
You can use the speakers built into the main monitor, or you can connect an external speaker system, such
as the Polycom StereoSurround kit, to provide more volume and richer sound in large rooms.
When you connect a SoundStation IP 7000 conference phone to a Polycom RealPresence Group system,
the conference phone becomes another way to dial audio or video calls. The conference phone also
operates as a microphone, and as a speaker in audio-only calls.
Refer to your system setup sheet for connection details. Make sure that the system is powered off before
you connect devices to it. For more information about connecting speakers to RealPresence Group
systems, refer to
System Back Panel Views
.
Four
Mic 1 set to
Left+Right
Mic 2 set to
Left+Right
Mic 3 set to
Left+Right
Mic 4 set to
Left+Right
Mic 1 set to Left
Mic 2 set to Left
Mic 3 set to
Right
Mic 4 set to
Right
Number of
Microphones
with Stereo
Enabled
Long Table
Wide Table
Not Used
Left Channel
Right
