manualshive.com logo in svg

Polycom RealPresence Group Series, Administrator'S Manual

Share
Download
Polycom RealPresence Group Series Administrator'S Manual Download Page 31

 

Introducing the Polycom RealPresence Group Series Systems

Polycom, Inc. 

31

 

 

Wake Up the RealPresence Touch

After inactivity, you must wake the RealPresence Touch by touching the screen.

Wake Up the RealPresence Touch

After two minutes of inactivity, the RealPresence Touch goes to sleep.

To wake up the RealPresence Touch:

» Touch the screen to wake it up.

The last screen that was displayed before the sleep state is displayed.

Connect the Polycom Touch Control

This section describes how you can make connections so that you can power on, power off, and wake up 
the Touch Control. For information about setting up and using the Touch Control, refer to 

Set Up the 

Polycom Touch Control

.

Power On the Polycom Touch Control

Before you can power on the Polycom Touch Control, you must connect the Ethernet cable to the device 
and to a wall outlet.

To power on the Polycom Touch Control:

1

Connect the Ethernet cable to the underside of the Polycom Touch Control. 

2

Plug the Ethernet cable into the wall outlet. Do one of the following:

If your room provides Power Over Ethernet, you can connect the Ethernet cable directly to a LAN 
outlet.

If your room does not provide Power Over Ethernet, you must connect the Ethernet cable to the 
optional power supply adapter. Then connect the power supply adapter to a LAN outlet and power 
outlet. The power supply adapter is sold separately.

The Polycom Touch Control powers on and displays the language selection screen.

Power Off the Polycom Touch Control

To power off the Polycom Touch Control:

1

From the Touch Control Home screen, touch 

 User Settings.

2

Scroll to the Power section.

3

Select Touch Control Power.

4

In the menu that appears, select Power Off the Touch Control. If you choose to power off the 
Polycom Touch Control, you must disconnect and reconnect the LAN cable to power it on again.

Summary of Contents for RealPresence Group Series





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands