manualshive.com logo in svg

Polycom RealPresence Group Series, Administrator'S Manual

The Polycom RealPresence Group Series is a cutting-edge video conferencing solution that enhances communication and collaboration in the business world. To maximize your user experience, you can easily download the free user manual from our website, providing step-by-step instructions and valuable insights on utilizing the product's features efficiently.

Share
Download
background image

 

Troubleshoot

Polycom, Inc. 

217

 

 

 

Restore button on RealPresence Group 300/310/500 systems

The restore button pinhole is on the front of the Polycom RealPresence Group 700 system, as shown in the 
following figure. 

Restore button on RealPresence Group 700 system

To reset the system to its factory partition software using the restore button:

1

Power off the system.

2

Straighten a paper clip and insert it into the pinhole.

3

Using the paper clip, press and hold the restore button.

4

While continuing to hold the restore button, press the power button once.

5

Keep holding the restore button for 10 more seconds, then release it.

During the factory restore process, the system displays the Polycom startup screen and the usual software 
update screens on HDMI monitors. Other types of monitors will be blank. Do not power off the system during 
the factory restore process. The system restarts automatically when the process is complete.

Use a USB Storage Device for a Factory Restore

If you start a factory restore while a USB storage device is connected, the system restores from the USB 
device instead of the system’s factory partition.

For about the first five minutes of the factory restore process, the system is erasing data on the SD card and 
extracting data from the USB device. This process runs from a special memory partition and graphics are 
not available, so your monitor will be blank. 

Summary of Contents for RealPresence Group Series





















































































































































































































































































Reviews:

No comments

Related manuals for RealPresence Group Series

Absima CR9T Quick Start preview
CR9T
Brand: Absima Pages: 5
LSS OCTO21A Operating Manual preview
OCTO21A
Brand: LSS Pages: 14
Woodward 2301E-HT Product Manual preview
2301E-HT
Brand: Woodward Pages: 84
Fender VOCAL SOUND SYSTEM WITH REVERB PA 100 Owner'S Manual preview
VOCAL SOUND SYSTEM WITH REVERB PA 100
Brand: Fender Pages: 8
Leviton Dimensions D3200 System Installation Manual preview
Dimensions D3200
Brand: Leviton Pages: 43
Spintso REFCOM PRO Quick Manual preview
REFCOM PRO
Brand: Spintso Pages: 2
H2flow levelsmart User Instruction Manual preview
levelsmart
Brand: H2flow Pages: 16
PNI Clementine 8440 User Manual preview
Clementine 8440
Brand: PNI Pages: 8
Grundig CCF 23 Service Manual preview
CCF 23
Brand: Grundig Pages: 28
Hyundai ACB90G5AN User Manual preview
ACB90G5AN
Brand: Hyundai Pages: 61
ACC SmarTouch Digital User Manual preview
SmarTouch Digital
Brand: ACC Pages: 28
RCA RS2533 User Manual preview
RS2533
Brand: RCA Pages: 20
Brookstone Wireless music system for iPod User Manual preview
Wireless music system for iPod
Brand: Brookstone Pages: 14
Foxtech T30 User Manual preview
T30
Brand: Foxtech Pages: 63
Boss Audio Systems BV9980 User Manual preview
BV9980
Brand: Boss Audio Systems Pages: 22
Raven AutoBoom Calibration & Operation Manual preview
AutoBoom
Brand: Raven Pages: 50
Dormakaba SVP-S 4 DCW Series Mounting Instructions preview
SVP-S 4 DCW Series
Brand: Dormakaba Pages: 5
Panasonic WXT3020 - ORDER TAKER - MULTI LANGUAGE Operating Instructions Manual preview
WXT3020 - ORDER TAKER - MULTI LANGUAGE
Brand: Panasonic Pages: 36

Brands by name

Popular brands

Load more brands