manualshive.com logo in svg

Polycom RealPresence Group Series, Administrator'S Manual

Share
Download
Polycom RealPresence Group Series Administrator'S Manual Download Page 71

 

Monitors and Cameras

Polycom, Inc. 

71

 

 

Polycom Cameras

Polycom RealPresence Group 700 systems provide inputs for multiple PTZ cameras. RealPresence Group 
310 and 500 systems can support a second non-PTZ camera, but do not support camera control for a 
second camera.

All Polycom cameras are capable of receiving IR signals.

Polycom RealPresence Group systems have built-in IR receivers to receive signals from the remote control. 
Be sure to point the remote control at the RealPresence Group system or your Polycom camera to control it. 

Polycom EagleEye IV

The Polycom EagleEye IV cameras are completely digital with a 4k sensor that is specifically designed to 
work with the RealPresence Group Series. They support 1080p60 resolution and are available with either 
12x or 4x zoom capabilities.

Polycom EagleEye IV

These cameras also have an available privacy cover, wide-angle lens, and digital extender. For more 
information, refer to Installing the Polycom EagleEye IV Wide Angle Lens, Setting Up the Polycom EagleEye 
IV Cameras, Setting Up the Polycom EagleEye IV Camera Privacy Cover, and Setting Up the Polycom 
EagleEye Digital Extender which are available at 

support.polycom.com

.

Polycom EagleEye III

The Polycom EagleEye

TM

 III camera can provide 1080i 60/50 fps, 1080p 60 fps, and 720p 60/50 fps 

resolutions on all Polycom RealPresence Group systems.

Polycom EagleEye III

Polycom EagleEye Acoustic

The Polycom EagleEye Acoustic camera can provide 1080p 25/30 fps resolution with embedded image 
sensor processing (ISP) technology and has an auto focus lens system, two microphones for stereo audio 
pickup, an IR detector, a status LED, and a captured HDCI cord for connection to the system.

Summary of Contents for RealPresence Group Series





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands