manualshive.com logo in svg

Polycom RealPresence Group Series, Administrator'S Manual

Share
Download
Polycom RealPresence Group Series Administrator'S Manual Download Page 66

 

Monitors and Cameras

Polycom, Inc. 

66

 

 

Monitor Profiles

Monitor Profiles set the preferences for what is shown on available monitors. Configuring this setting allows 
you to customize the monitor configuration to match your environment or your desired meeting experience.

The Monitor Profiles settings are just preferences. What you see can vary depending on layout views, 
whether content is being shown, the number of active monitors, and so on. 

The following table describes the configuration of each monitor profile.

Setting

Description

Enable 

Specifies the monitor setting:

•

Auto–This is the default setting. Specifies that the Video Format and Resolution 
settings are automatically detected and disables those settings.

•

Manual–Enables you to select the Video Format and Resolution settings. 
Resolution settings are filtered based on the Video Format you selected.

•

Off–Disable this monitor.

Monitor Profile

Specifies which profile to use for this monitor. The choices depend on how many 
monitors the system uses and which monitor you are configuring.

Video Format

Specifies the monitor’s format. Depending on which RealPresence Group System and 
monitor you configure, the choices are:

•

HDMI

•

DVI

•

Component

•

VGA

Note: This setting is unavailable when you select Auto for the Enable setting.

Resolution

Specifies the resolution for the monitor.

Note: This setting is unavailable when you select Auto for the Enable setting.

Setting

Description

Decide for Me

Default setting that sets monitors to show content and the current speakers 
based on a variety of factors. When you select Decide for Me, the settings 
for Monitor 2 and Monitor 3 are unavailable. If you later choose a different 
setting, the original values persist.

Note: When Decide for Me is enabled, content is normally sent to Monitor 2.

Me Only (Monitor 2 or Monitor 3)

Sets the monitor to always show you. 

Speaker Only

Sets the monitor to show current people speaking at the far-end on 
Monitor 1. Monitor 2 shows only one person.

Content Only (Monitor 2 or 
Monitor 3)

Sets the monitor to show available content. Otherwise, the monitor shows 
the room background. 

Speaker and Content

Sets the monitor to show available content. Otherwise, the monitor shows 
the person speaking at the far-end. You can browse layouts with this setting.

Summary of Contents for RealPresence Group Series





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands