manualshive.com logo in svg

Polycom RealPresence Group Series, Administrator'S Manual

Share
Download
Polycom RealPresence Group Series Administrator'S Manual Download Page 201

 

Diagnostics, Status, and Utilities

Polycom, Inc. 

201

 

 

Call Direction

In—For calls received.

Out—For calls placed from the system.

Conference ID

A number given to each conference. A conference can include more than one far site, so 
there might be more than one row with the same conference ID.

Call ID

Identifies individual calls within the same conference.

Total H.320 
Channels Used

Number of narrow-band channels used in the call.

Endpoint Alias

The alias of the far site.

Reserved

Polycom use only.

View Name

Names the web or local interface used in the call.

User ID

Lists the ID of the user who made the call.

Endpoint Transport 
Address

The actual address of the far site (not necessarily the address dialed).

Audio Protocol (Tx)

The audio protocol transmitted to the far site, such as G.728 or G.722.1. 

Audio Protocol (Rx)

The audio protocol received from the far site, such as G.728 or G.722.

Video Protocol (Tx)

The video protocol transmitted to the far site, such as H.263 or H.264.

Video Protocol (Rx)

The video protocol received from the far site, such as H.261 or H.263.

Video Format (Tx)

The video format transmitted to the far site, such as CIF or SIF.

Video Format (Rx)

The video format received from the far site, such as CIF or SIF.

Disconnect Local ID 
and Disconnect 
Reason

The identity of the user who initiated the call and the reason the call was disconnected.

Q.850 Cause Code

The Q.850 cause code showing how the call ended.

Total H.320 Errors

The number of H.320 errors experienced during the call.

Average Percent of 
Packet Loss (Tx)

The combined average of the percentage of both audio and video packets transmitted that 
were lost during the 5 seconds preceding the moment at which a sample was taken. This 
value does not report a cumulative average for the entire H.323 call. However, it does report 
an average of the sampled values.

Average Percent of 
Packet Loss (Rx)

The combined average of the percentage of both audio and video packets received that 
were lost during the 5 seconds preceding the moment at which a sample was taken. This 
value does not report a cumulative average for the entire H.323 call. However, it does report 
an average of the sampled values.

Average Packets 
Lost (Tx)

The number of packets transmitted that were lost during an H.323 call.

Average Packets 
Lost (Rx)

The number of packets from the far site that were lost during an H.323 call.

Data

Description

Summary of Contents for RealPresence Group Series





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands