Polycom 8 User Manual Download Page 80

Page: 80 / 434

Chapter 5 - Monitoring an On Going Conference

5-4

The Meeting Director Pane

The

Meeting Director

pane lists the On Going conferences running on all

connected MCUs.

To access the Meeting Director from the WebCommander site:

In the

Main Men

u pane, click the

On Going Conferences

link.

•

If there are

no On Going conferences running

that you have

permission to monitor, the

Meeting Director On Going Conferences

List

opens with no conferences in the list.

•

If there is

one On Going conference running

that you have permission

to monitor, the

Meeting Director monitoring

window opens for that

conference, enabling you to view the conference details and perform
operations.

Summary of Contents for 8



















































































































































































































































































































































































































































Search results

Summary of Contents for 8

Reviews:

Brands by name

Popular brands

Polycom 8, User Manual

Search results

Summary of Contents for 8

Reviews:

Brands by name

Popular brands