Polycom 8 User Manual Download Page 104

Page: 104 / 434

Chapter 5 - Monitoring an On Going Conference

5-28

General Conference Information

Pointing to the

Information

icon lists the conference general settings and

status.

To view the conference status from the Information icon:

•

On the

Toolbar

area of the

Meeting Director/Conference Manager

window, point to the

Information

icon.

Table 5-9 describes the information that is displayed.

Table 5-9: Conference Status Information

Status Field

Description

Start Time

The conference start time.

End Time

The conference end time.

MCU

The name of the MCU unit running the conference.

Dial-in number

The dial-in number that participants use to access
the Meet Me Per conference.

Summary of Contents for 8



















































































































































































































































































































































































































































Search results

Summary of Contents for 8

Reviews:

Related manuals for 8

Brands by name

Popular brands

Polycom 8, User Manual

Search results

Summary of Contents for 8

Reviews:

Related manuals for 8

Brands by name

Popular brands