Planet IP DSLAM IDL-2400 User Manual Download Page 462

Page: 462 / 707

IDL series User Guide

462

5.14.5.3 Delete igmpsnoop querier info

Description:

Use this command to delete.

Command Syntax:

delete igmpsnoop querier info vlanid

<vlanid-val >

portid

Parameters:

Name

Description

vlanid

<vlanid-val>

The VLAN id for this VLAN. In devices supporting "Shared Vlan for

multicast" capability, the information for a multicast MAC address is

shared across VLANS. Hence, vlanid is optional and can be passed as

zero or a valid vlanid value. In devices supporting "Independent Vlan

for multicast" capability, each vlan can have its own information for a

multicast MAC address. Hence, VLAN id is a mandatory parameter

and a valid value of vlanid must be passed. For the case when the

attribute "McastDeviceCapabilities" of MO "sysSizingTable" has value

"none", VLAN id is not required. This feature is not supported for VLAN

with vlanid as 4097.VLAN here means the 802.1q Vlan in case of

Native Vlan mode and Virtual Vlan in case of Stacked Vlan Mode.

Type:

Create -- Mandatory

Delete -- Mandatory

Modify -- Mandatory

Get -- Optional

Valid values:

1-4095

portid

<portid-val>

A Bridge Port, belonging to the Vlan (dot1qVlanIndex), on which the

Querier exists.

Type:

Create -- Mandatory

Delete -- Mandatory

Get --Optional

Valid values:

1 - 65535

Example

$ create igmpsnoop querier info vlanid 6 portid 6

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Related manuals for IP DSLAM IDL-2400

Brands by name

Popular brands

Planet IP DSLAM IDL-2400, User Manual

Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Related manuals for IP DSLAM IDL-2400

Brands by name

Popular brands