manualshive.com logo in svg

Planet IP DSLAM IDL-2400, User Manual

Share
Download
Planet IP DSLAM IDL-2400 User Manual Download Page 684

IDL series User Guide

 

684 

version 

<version>  

This specifies the version of the file that need to be removed.   

Type:  

Optional for single version file. Mandatory for multiple version 

file. Default Value:   

 

Example: 

$ remove fname /nvram/user/commands.cfg   

 

Output: 

Verbose Mode On 

File removed 

 

Verbose Mode Off 

File removed 

 

Output Fields: 

None  

 

References: 

apply command 

list command 

download command 
 
 

5.28.1.7 Upgrade 

 

Description:  

Use this command to upgrade a configuration or binary file stored on the system. 

 

Command Syntax:   

upgrade fname

 <file-name> 

version 

<version> 

 

Parameters: 

Name 

 

Description 

 

fname 

<file-name>

 

 

This specifies the file name, which needs to be upgraded.    The specified 

file becomes Active and the present active file is made inactive.The user 

shall specify the filename for files present in Columbia, as directories. The   

directories are /nvram/bin/control/, /nvram/bin/dataplane/, 

/nvram/bin/decompressor,  /nvram/bin/dslphy, /nvram/cfg/factorydef/, 

/nvram/ user/,   

Type : 

Mandatory  

Valid values: 

string of upto 128 characters (‘A’-’Z’, ‘a’-‘z’, ‘0’-‘9’, ’-‘, ’_’)   

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands