Planet IP DSLAM IDL-2400 User Manual Download Page 638

Page: 638 / 707

IDL series User Guide

638

Output:

Verbose Mode On

Control Plane Binary : COL 2.6.0.0.040217

Data Plane Binary : DP_B02_06_19

Output Fields:

FIELD

Description

Control Plane Binary

This tells about the version of the control plane

binary with which the system has come up.

Data Plane Binary

This tells about the version of the data plane binary

with which the system has come up.

5.25.13 Trace Log Configuration Commands

5.25.13.1 Get trace cfg

Description:

Use this command to display the trace configuration for a specific module, or for all

modules.

Command Syntax:

get trace cfg

[

module

<module-name>]

5.25.13.2 Modify trace cfg

Description:

Use this command to modify the trace and log configuration for a specific module

Command Syntax:

modify trace cfg module

<module-name> [

flow

<trace-flow>] [

level

<trace-level>]

[

syslog|net|stdout

] [

dest

<ip-address>] [

port

<port-number>]

Parameters:

Name

Description

module

<module-name>

|all

This specifies the module, for which trace/log configuration

is to be modified.

Type :

Modify – Mandatory

Get – Optional

Valid values:

GCOS,OAM, CIN, GAG, CDB, CLI, ATM,

EOA, TBG, DSLME, NVM, FFC, DNCD, DATAME, GARP,

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Brands by name

Popular brands

Planet IP DSLAM IDL-2400, User Manual

Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Brands by name

Popular brands