manualshive.com logo in svg

Planet IP DSLAM IDL-2400, User Manual

Share
Download
Planet IP DSLAM IDL-2400 User Manual Download Page 184

IDL series User Guide

 

184 

bridge port is 256. This field is unused if the bridge port is created over an 

PPPOE/IPOE interface or PPPOE/ IPOE is sensed. Any value of this field 

shall be ignored for a bridge port created over a PPPOE/IPOE interface. 

Type:

 Modify 

－

 Optional  

learning 

enable | 

disable  

The State of Learning on this bridge port. The value enable (1) indicates 

that unicast Mac address learning is enabled and the value disable 

indicates that unicast Mac address learning is disabled on this bridge port. 

The default value of learning status for CPE/Downlink side bridge ports 

shall be enable and for NET side bridge port default value shall be enable. 

This field is unused if the bridge port is created over a PPPOE/IPOE 

interface or PPPOE/IPOE is sensed. Any value of this field shall be 

ignored for a bridge port created over a PPPOE/IPOE interface.   

Type:

 Modify 

－

 Optional  

status 

enable | disable    The desired state of the bridge port. On creation the bridge port shall be 

created in enabled AdminStatus by default.   

Type:

 Modify 

－

 Optional  

stickystatus

 enable 

|disable 

 

Indicates if the port has been set as sticky. The value enable(1) indicates 

that the entries learnt on this port won't be aged out. It also indicates that 

the entries learnt on this port shall not be learnt on any other port. The 

entries learnt on this port can only be removed by management action or 

by making the value as disable (2) so that the entries can be aged out. 

This field is unused if the bridge port is created over an PPPOE/ IPOE 

interface or PPPOE/IPOE is sensed. Any value of this field shall be 

ignored for a bridge port created over a PPPOE/IPOE interface.   

Type:

 Modify 

－

 Optional  

fdbmodify 

enable | 

disable 

 

This specifies whether this port can overwrite an existing forwarding 

database entry. This field is unused if the bridge port is created over an 

PPPOE/ IPOE interface or PPPOE/IPOE is sensed. Any value of this field 

shall be ignored for a bridge port created over a PPPOE/IPOE interface. 

Type:

 Modify 

－

 Optional  

aclglbdenyapply 

Enable |Disable 

 

This specifies whether the global acl macentry deny list represented by 

MO AclGlobalMacList is to be applied to this port or not. The default value 

of this parameter shall depend on the port type. For Net side ports, the 

default value shall be disable and for the cpe side ports the default value 

shall be enable. This field is unused if the bridge port is created over an 

PPPOE/IPOE interface or PPPOE/IPOE is sensed. Any value of this field 

shall be ignored for a bridge port created over a PPPOE/IPOE interface. 

Type:

 Modify 

－

 Optional  

aclglbtrackapply 

Enable |Disabl

e  

This specifies whether the global acl macentry track list represented by 

MO AclGlobalMacList is to be applied to this port or not. The default value 

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands