Planet IP DSLAM IDL-2400 User Manual Download Page 543

Page: 543 / 707

IP DSLAM

543

5.21.5.4 Modify rl actionprofile info

Description:

Use this command to modify.

Command Syntax:

modify rl actionprofile info profileid

<profileid-val>

result

conform | exceed |

[

actionval

<actionval-val>] [

actionmask

<actionmask-val>] [

description

<description-val>]

Parameters:

Name

Description

profileid

<profileid-val>

Rate limiter's action profile identifier, which uniquely identifies

the action profile.

Type:

Create -- Mandatory

Delete -- Mandatory

Modify -- Mandatory

Get -- Optional

Valid values:

1 - 32

result

conform |

exceed | violate

The result type for which action is configured to be taken.

Multiple actions can be configured for a result type.There shall

be multiple entries with same profile identifier and a result type if

multiple actions are configured for the result type. If there is no

entry configured for a result type, the action is assumed to be

'allow' for that result.

Type:

Create -- Mandatory

Delete -- Mandatory

Modify -- Mandatory

Get -- Optional

action

drop | allow |

sendtocontrol |

copytocontrol |

modifytos | setbaclevel

Action to be taken on the packet.

Type:

Create -- Mandatory

Delete -- Mandatory

Modify -- Mandatory

Get -- Optional

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Brands by name

Popular brands

Planet IP DSLAM IDL-2400, User Manual

Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Brands by name

Popular brands