Planet IP DSLAM IDL-2400 User Manual Download Page 496

Page: 496 / 707

IDL series User Guide

496

Output:

Verbose Mode On

Entry Created

Profile Id AC Name

------------------------------------------------------------

2 ABCServer

Verbose Mode Off:

Entry Created

Output Fields:

FIELD

Description

Profile Id

Profile Id of the AC Name configured.

AC Name

AC Name for the Session, based on which, the

AC is selected.

References:

PPPoE global ACprofile related commands.

5.19.2 PPPoE Global Config Commands

5.19.2.1 Get pppoe global config

Description:

Use this command to get.

Command Syntax:

get pppoe global config

5.19.2.2 Create pppoe global config

Description:

Use this command to modify.

Command Syntax:

modify pppoe global config

[

padimaxnumretries <

padimaxnumretries-val>

]

[

padrmaxnumretries <

padrmaxnumretries-val> ] [

paditxintrvl

<paditxintrvl-val>

]

[

padrtxintrvl<

padrtxintrvl-val> ] [

wandntmrintrvl

<wandntmrintrvl-val>

]

[

inactivitytmrintrvl

<inactivitytmrintrvl-val>

]

[

discmaxnumretries

<discmaxnumretries-val>

]

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Related manuals for IP DSLAM IDL-2400

Brands by name

Popular brands

Planet IP DSLAM IDL-2400, User Manual

Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Related manuals for IP DSLAM IDL-2400

Brands by name

Popular brands