Planet IP DSLAM IDL-2400 User Manual Download Page 555

Page: 555 / 707

IP DSLAM

555

the profile. For PP scheduling algorithm, it is

ignored.

For Custom scheduling algorithm, this parameter

specifies the Maximum bandwidth limit in Kbps

for the class. Value zero means no maximum

bandwidth limit for the class.

Profile Class Param4

This specifies the fourth parameter for the class

queue that is used in the scheduling algorithm of

the profile. For PP and Custom scheduling

algorithms, it is ignored. The default value listed

is only an indicative value.

Profile Class Param5

This specifies the fifth parameter for the class

queue that is used in the scheduling algorithm of

the profile. For PP and Custom scheduling

algorithms, it is ignored. The default value listed

is only an indicative value.

References:

Scheduling profile related commands

5.21.9 Scheduling profile info Commands

5.21.9.1 Get sched profile info

Description:

Use this command to get.

Command Syntax:

get sched profile info

[

name

<name-val>]

5.21.9.2 Create sched profile info

Description:

Use this command to create.

Command Syntax:

create sched profile info name

<name-val> [

algo pp | custom

]

iftype eth| atm

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Related manuals for IP DSLAM IDL-2400

Brands by name

Popular brands

Planet IP DSLAM IDL-2400, User Manual

Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Related manuals for IP DSLAM IDL-2400

Brands by name

Popular brands