manualshive.com logo in svg

Planet IP DSLAM IDL-2400, User Manual

Share
Download
Planet IP DSLAM IDL-2400 User Manual Download Page 706

IDL series User Guide

 

706 

Appendix D --- What’s IP DSLAM 

 

DSLAM and IP DSLAM in PPPoE application sample. 

 

 

 

 

As above Figure displays, in traditional ATM-based ADSL network, the user application 

information is encapsulated by ADSL CPE into ATM cells in pre-defined VC (Virtual 

Channel, PVC), and then upstream the ATM cells to DSLAM via ADSL link. (In this example, 

the user information (PPPoE encapsulated) is encapsulated by ATU-R using RFC-1483 

Bridge-mode encapsulation format.). 

 

All the ATM cells belong to the specified VC is concentrated by the DSLAM, and switched in 

the ATM network clouds, to the defined destination (ISPs or Offices), at there the ATM cells 

and PPPoE frames is resolved by the Broadband Access Server, and the user application 

information is serviced. 

 

 

 

 

 

 

 

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands