manualshive.com logo in svg

Planet IP DSLAM IDL-2400, User Manual

Share
Download
Planet IP DSLAM IDL-2400 User Manual Download Page 681

IP DSLAM 

 

681

5.28.1.4 Permission 

 

Description:  

Use this command to change the permission of the files stored on flash.   

 

Command Syntax:   

permission fname 

<fname-val>

 type

 ro|rw|pr

 

[

version 

<version-val>]

   

 

Parameters: 

Name 

 

Description 

 

fname fname 

 

Name of the file whose permission is to be changed. 

Type:

 mandatory   

Valid values:

 string of up to 128 characters: ('A'-

'Z','a'-'z', '0'-'9', '-','_')   

version version 

 

This specifies the version of the file that need to be 

applied.  

Type: 

Optional for single version file.   

Mandatory for multiple version file.   

type ro|rw|pr 

 

This specifies that to what type, ro (read-only), rw 

(read-write), or pr (protected), permission of the file is to 

be changed.   

Type:

 mandatory   

Valid Values :

 ro | rw | pr   

 

Mode: 

Super-User  

 

Example: 

$ permission fname /nvram/user/commands.cfg version 1 type ro 

 

Output: 

Verbose Mode On 

Set Done 

 

Verbose Mode Off 

Set Done 

 

Output Fields

: 

None  

 

 

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands