manualshive.com logo in svg

Planet IP DSLAM IDL-2400, User Manual

Share
Download
Planet IP DSLAM IDL-2400 User Manual Download Page 68

IDL series User Guide

 

68 

Field 

Definition 

DSL Port 

Port No. of the IP DSLAM 

VPI Virtual 

Path 

Identifier 

VCI 

Virtual Channel Identifier 

Learning Status 

The state of learning on this bridge port. The value 

enable (1) 

indicates that unicast Mac address learning is enabled and the 
value 

disable 

indicates that unicast Mac address learning is 

disabled on this bridge port. 

Sticky Status 

Indicates if the port has been set as sticky. The value 

enable (1) 

indicates that the entries learned on this port will not be aged out. 
It also indicates that the entries learned on this port shall not be 
learned on any other port. The entries learned on this port can 
only be removed by management action or by making the value 
as 

disable (2), 

so that the entries can be aged out. 

Pvid Port 

VID 

Accepted Frame Type  Used to up/down connection. 

Ingress Filter 

When this is 

true

, the device will discard incoming frames for 

VLANs, which do not include this Port in its Member set. When 

false

, the port will accept all incoming frames. 

 

Priority 

Optional Connection priority. No VLAN tag, no priority.

 

 

a. Choose the port to configure from the DSL Port drop-down list. 

 

b. Configure the Administration status as “Up” or “Down”. 

 

c. Choose a Line Profile from the Line Profile Name drop-down list. If to configure a 

Line Profile, Click on 

  to activate the Line Profile Configuration window. 

 

d. Choose an Alarm Profile from the Alarm Profile Name drop-down list. If to configure 

an Alarm Profile, Click on 

  to activate the Alarm Profile Configuration window. 

 

If necessary, modify values of specified PVC, including VPI, VCI, Admin Status, Learning 

Status, Sticky Status, Pvid, Accepted Frame Type and Ingress Filter, and priority. 

 

e. Click on 

  to submit or click on 

  to close the fmBridgeport window. 

 

f. If to create new PVC, click on 

  and then PVC2 appears and then users can 

set perimeters via PVC2. after that, click on 

  to submit your setting. 

 

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands