manualshive.com logo in svg

Planet IP DSLAM IDL-2400, User Manual

Share
Download
Planet IP DSLAM IDL-2400 User Manual Download Page 557

IP DSLAM 

 

557

 

Output field: 

Field 

 

Description 

 

Profile Name 

Name of the scheduling profile 

Scheduling 

Algorithm 

Scheduling algorithm of the profile. Currently only 

Proabalistic Priority is supported over ethernet and 

custom is supported over ATM. In Proabalistic 

Priority algorithm, the traffic class parameter 

determines the probablity with which its 

corresponding queue is served when it is polled by 

the server. In Custom algorithm, user shall have 

flexibility to assign minimum rate, maximum rate, 

and excess bandwidth sharing weight for classes 

and the scheduling shall be done based on these 

parameters among classes. 

Interface Type 

The type of the interface Ethernet/ATM port for 

which the scheduling profile is applicable. 

 

Caution:

 

z

 

For a scheduling profile that has iftype as atm, upto 8 classes can be 

configured, while for a scheduling profile that has iftype as eth, 8 classes can be 

configured. 

 

References: 

z

 

Scheduling profile related commands. 

 
 

5.21.10 Trfclass profile class Commands 

 

5.21.10.1 Get trfclass profile class 

 

Description: 

Use this command to get. 

 

Command Syntax:

 

get trfclass profile class

 [

profileid

 <profileid-val>] [

classid

 <classid-val>]

 

 
 
 
 
 
 

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands