manualshive.com logo in svg

Planet IP DSLAM IDL-2400, User Manual

Share
Download
Planet IP DSLAM IDL-2400 User Manual Download Page 534

IDL series User Guide

 

534 

5.21 QoS Commands 

 

5.21.1 IRL Map Commands 

 

5.21.1.1 Get irl map 

 

Description:

 

Use this command to get. 

 

Command Syntax: 

get irl map 

[

ifname

 <interface-name>] 

 

5.21.1.2 Create irl map 

 

Description: 

Use this command to create. 

 

Command Syntax:

 

create irl map ifname

 < interface-name > 

profilename

 <profile-name> 

 

5.21.1.3 Delete irl map 

 

Description:

 

Use this command to delete. 

 

Command Syntax: 

delete irl map ifname

 < interface-name > 

 

Parameters: 

Name 

 

Description 

 

ifname 

< interface-name 

>  

Interface Name whose IRL mapping information is to be 

configured.  

Valid Values:

 aal5-0 - aal5-*   

Type : 

 Create   Mandatory  

Delete  Mandatory  

Get --Optional   

Valid values: 

ND - ND   

profilename 

<

profile-name>  

Specifies the name of the IRL profile to be associated with the 

interface. String of up to 64 characters ( 'A'- 'Z', 'a'-'z', '0'-'9','-','_') 

and any combination of printable characters excluding ';'   

Type:

 Create Mandatory   

 

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands