Planet IP DSLAM IDL-2400 User Manual Download Page 312

Page: 312 / 707

IDL series User Guide

312

Parameters:

Name

Description

ifname

<interface-name>

This parameter specifies the name assigned to this interface.

Valid Values starts from ehdlc-0 and continues to ehdlc-*

Type:

Create -- Mandatory

Delete -- Mandatory

Modify -- Mandatory

Get -- Optional

Valid values:

IAD_MIN_EHDLC_IFINDEX -

IAD_MAX_EHDLC_IFINDEX

lowif

<lowif-val>

This specifies the lower interface index. This is the ifindex of

the DSL port on which EHDLC is being created. Valid Values

start from dsl-0 and continues to dsl-*

Type:

Create -- Mandatory

Valid values:

dsl-0 – dsl-23

sarstatus

Enable |

Disable

This defines the segmentation and reassembly status of the

hdlc/dsl interface. HDLC supports only 508 as frame size, to

support longer snmp messages, it should be turn off. By

default, the option taken is 'disable'.

Type:

Create -- Optional

Modify -- Optional

Default value:

disable

enable | disable

Administrative status of the Ehdlc interface

Type:

Optional

Example:

$ create ehdlc intf ifname ehdlc-0 lowif dsl-0 SarStatus Enable enable

Output:

Verbose Mode On

Entry Created

IfName : ehdlc-0 LowIfName : dsl-0

EHDLC Sar Status : enable Admin Status : Enable

Verbose Mode Off:

Entry Created

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Brands by name

Popular brands

Planet IP DSLAM IDL-2400, User Manual

Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Brands by name

Popular brands