Planar m52L Installation Manual Download Page 90

Page: 90 / 124

Serial Port Settings

m52L Installation Guide

Part of the RS232 command will be an address. This address may take several forms.
For example, suppose you have eight displays in one area divided into two groups.
You might set the IDs of the displays like this:

With this scheme, you have four ways to address these displays:

ASCII Response Type

Determines what type of data will be returned to the computer. For human-readable
text in a serial program, choose

SYMBOLIC

. For computer-read data, use

NUMERIC

DATA

ONLY

ASCII Response Terminator

ill be determined by what your serial program wants to see at the end of every

transmission from the display.

Group ID

Unit ID

Address

Affect on Displays

A3
B4
etc.

Only the specific display addressed will obey the command.
Also, the display will respond to the host computer.

All displays in this serial loop will obey the command.

Both the displays whose IDs end in “4” will obey this
command.

All four displays in Group B will obey the command.

Summary of Contents for m52L





























































































































Search results

Summary of Contents for m52L

Reviews:

Planar m52L, Installation Manual, Page: 90 / 124

Search results

Summary of Contents for m52L

Reviews: