Physio Control LIFEPAK 15 Operating Instructions Manual Download Page 122

Page: 122 / 284

Automated External Defibrillation (AED)

122

LIFEPAK 15 Monitor/Defibrillator Operating Instructions

The

ANALYZING NOW—STAND CLEAR

prompts occur. The SAS analyzes the

patient’s ECG in

approximately 6 to 9 seconds and advises

either

SHOCK ADVISED

NO SHOCK

ADVISED

Continue to follow the screen messages and voice prompts provided by the AED.

Shock Advised

The following prompts occur when shock is advised:

If the AED detects a shockable rhythm,

the

SHOCK ADVISED

prompts occur.

Charging to the joule setting for Shock

#1 begins. A charging bar appears and a

ramping tone sounds.

When charging is complete, the available

energy is displayed.
The

STAND CLEAR, PUSH SHOCK

BUTTON!

( ) message occurs, followed

by a “Shock ready” tone.
Clear everyone away from touching the

patient, bed, or any equipment that is

connected to the patient.
Press (shock) to deliver energy to the

patient.

When the (shock) button is pressed, the

ENERGY DELIVERED

message occurs

indicating that the energy transfer was

completed.

Summary of Contents for LIFEPAK 15





























































































































































































































































































Search results

Summary of Contents for LIFEPAK 15

Reviews:

Related manuals for LIFEPAK 15

Brands by name

Popular brands

Physio Control LIFEPAK 15, Operating Instructions Manual

Search results

Summary of Contents for LIFEPAK 15

Reviews:

Related manuals for LIFEPAK 15

Brands by name

Popular brands