Physio Control LIFEPAK 15, Operating Instructions Manual

Page: 164 / 284

Patient Records and Reports
164
LIFEPAK 15 Monitor/Defibrillator Operating Instructions
Table 28
Possible Event Log Entries
Monitoring
•
Check patient
• Initial rhythm
• Replace battery
•
12-lead
• NIBP
•
Alarm events
•
IP label change
• Vital signs
•
5-wire on/off
• SpCO/SpMet Advisory
AED
•
Connect electrodes
• Motion
•
Analysis
•
Analysis stopped
• Shock advised
•
No shock advised
CPR Metronome
•
On/Off
•
Age-Airway changed
Defibrillation
•
Manual mode
• Charge removed
• Shock X, XXXJ
•
Shock X, Abnormal
Operator Initiated
•
Event
• Alarms on/off
• Print
•
VF/VT alarm on/off
• Sync on/off
•
Snapshot
•
Internal pacer detection on/off
Pacing
•
Started
• Set
• Changed
•
Stopped
• Paused
Transmission
• Transmission complete
• Transmission failed
•
Transmission cancelled
Memory Status
• Out of waveform memory (memory low)
•
Out of event memory (memory full)
Waveform Events
In addition to being documented in the Event Log, therapy and other selected events also
capture waveform data that are printed with the long and medium CODE SUMMARY report.
The waveform events and the characteristics of waveform data are described in the following
table.
Table 29 Waveform Events
EVENT NAME WAVEFORM DATA (WHEN CAPTURED)
INITIAL RHYTHM 8 seconds after leads on
CHECK PATIENT 8 seconds prior to alert
SHOCK or NO SHOCK ADVISED 2-3 segments of analyzed ECG. Each segment is 2.7 seconds
ANALYSIS X STOPPED 8 seconds of data prior to cessation of analysis
SHOCK X 3 seconds prior to shock and 5 seconds after shock
PACING X STARTED 8 seconds prior to increase of current from 0
PACING X SET 8 seconds after ppm and mA are stable for 10 seconds
PACING X CHANGED 8 seconds after pacing rate, current, or mode is changed
PACING X STOPPED 3 seconds prior to pacing current is zero and 5 seconds after