Phoenix Contact FL SWITCH MM HS UM E User Manual Download Page 88

Page: 88 / 292

FL SWITCH MM HS

4-8

PHOENIX CONTACT

6874_en_16

Options

Figure 4-10

"Options" menu

Two functions are available for selection:

–

Activate/deactivate the web server.

–

Configure the port mirroring function.

If ports are set with the same value for the source and destination, port mirroring will be

disabled. The source port is set to "0".

Enter the destination port in the relevant multicast group in order to enable multicast

packets to be received at the set destination port.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Summary of Contents for FL SWITCH MM HS UM E





































































































































































































































































































Search results

Summary of Contents for FL SWITCH MM HS UM E

Reviews:

Phoenix Contact FL SWITCH MM HS UM E, User Manual, Page: 88 / 292

Search results

Summary of Contents for FL SWITCH MM HS UM E

Reviews: