Phoenix Contact FL SWITCH MM HS UM E, User Manual, Page: 19 / 292

The Modular Managed Switch System (MMS) and the Managed Compact Switch (MCS)
6874_en_16 PHOENIX CONTACT
1-9
– Slot for first extension module/head station
Connect this extension module either to a head station or to the first extension module
here.
1.2.4.3 View of the interface modules (example)
Figure 1-5 View of the interface modules (example)
– Connection for extension module/head station
This connector is used to connect the interface module and the extension module or the
head station.
– Guide bars
These bars aid installation and hold the interface modules securely in place.
– Positive latches
These latches must be pressed in order to remove the interface module (previous
versions used mounting screws).
– Ethernet ports
These are the ports for the various interfaces and connection directions.
– Marking groove for Zackband ZBF ...
– Mounting screws to lock the interface modules in place.
68741002
Guide bars
Positive latches
Ethernet ports,
connection on the front
Ethernet ports,
connection on the bottom
Connection for head
station/extension module
Marking groove
for Zackband ZBF
Mounting screws
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx