Product designation
3-2
PHOENIX CONTACT
6874_en_16
3.2
Using Smart mode
Smart mode enables the user to change the operating mode of the switch without having to
access the management interface.
The switch offers the following setting options via Smart mode:
–
Reset to default settings
–
Set PROFINET mode
–
Set Ethernet/IP mode
–
Exit Smart mode without changes
3.2.1
Activating Smart mode
The mode button is used to call/exit Smart mode and to select the desired setting. The three
mode LEDs indicate the mode that is currently set and the mode that is entered when exiting
Smart mode.
3.2.1.1
Calling Smart mode
•
Once the switch has booted, as soon as the three mode LEDs
go out
press and hold
down the mode button for at least five seconds. When Smart mode is active, the three
LEDs flash.
•
When Smart mode is started, the switch is initially in the "Exit without changes" state.
3.2.1.2
Selecting the desired setting
•
To select the various settings, press the mode button briefly and select the desired
operating mode.
3.2.1.3
Exiting Smart mode
•
To exit, press and hold down the mode button for at least five seconds. The previously
selected operating mode is saved.
3.2.1.4
Possible operating modes in Smart mode
The switch supports the selection of the following operating modes in Smart mode (see also
example below):
Table 3-1
Operating modes in Smart mode
Mode
ACT
LED 1
100
LED 2
FD
LED 3
Display (MMS only)
Exit Smart mode without changes
OFF
OFF
ON
S1
Reset to default settings
OFF
ON
OFF
S2
Set PROFINET mode
OFF
ON
ON
S3
Set Ethernet/IP mode
ON
OFF
OFF
S4
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx