The Modular Managed Switch System (MMS) and the Managed Compact Switch (MCS)
6874_en_16
PHOENIX CONTACT
1-15
During error-free operation:
Messages during operation with the memory module:
Messages during operation with the MRP memory module:
Display
Meaning
xx
.
PROFINET connection established between controller and MMS
bo
Extracting/starting firmware (boot)
01
Sending BootP requests
SC
Parameterization data being saved to the plug-in memory and the head
station.
03
Downloading firmware via TFTP
04
Loading firmware in the Flash memory that was loaded via the network
05
The recently loaded firmware was successfully saved in the Flash mem-
ory
_ _
Initializing firmware
--
Firmware running
rb
A reset has been triggered via SNMP, WBM or V.24 (RS-232), the device
is preparing to restart (reboot)
rC
After a device configuration update, "
rC
" (reconfiguration) may appear in
the display after a restart. This means that the firmware automatically
adapts the new configuration and then restarts the switch again.
Pb
A port blocked by the port security function is indicated with "Pb".
dP
The device is operated as a PROFINET IO device and is waiting for
startup using a PROFINET controller. The device cannot be accessed via
an IP address.
"00" alternates
with another
display
In PROFINET mode, the engineering tool called the "flashing" function.
SP
Spanning Tree initialization active
Display
Meaning
0P
Parameterization data being read from the plug-in memory
EC
Equal configuration - the configurations on the memory module and in the
head station are the same
dC
Different configuration - the configurations on the memory module and in
the head station are different
0C
The memory module is empty
Display
Meaning
LF
Loop Failure - the MRP manager has detected an error in the redundant
ring
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx