FL SWITCH MM HS
1-22
PHOENIX CONTACT
6874_en_16
1.4.4
Device view (MCS)
1.4.4.1
Front view/operating elements/slots for the MCS
Figure 1-13
Front view/operating elements/slots for the MCS
–
Diagnostic/status indicators
Important information is displayed directly on the device. Each port has two LEDs. The
top LED always indicates the "LINK", while the bottom LED display is set with the
function switch.
–
Function switch for LEDs
The MODE function switch can be used to specify which information is displayed by the
second port-specific LED. The three LEDs below the switch indicate the selected
mode. This information is then displayed by all port-specific LEDs (see also example
on page 1-13).
–
Mini-DIN V.24 (RS-232)
V.24 (RS-232) interface in Mini-DIN format for local configuration via the serial
interface.
–
Alarm contact
The floating alarm contact can be connected here via a 2-pos. COMBICON connector.
–
Supply voltage connection
The supply voltage can be connected redundantly via the 4-pos. COMBICON
connector as an option.
–
Slot for MEM PLUG
FL SWITCH MCS 16TX
Ord. No. 28 32 70 0
00.A0.45.1B.D2.1D
MAC
Address
1
3
5
7
2
4
6
8
9
11
13
15
10
12
14
16
9
16
10 11 12 13 14 15
1
8
2
3
4
5
6
7
MODE
ACT 100
FD
US1 US2 FAIL
X19
V.24
X17
US1 GND US2 GND
X18
R1 R2
Ethernet ports
Mini-DIN V.24
(RS-232)
Alarm
contact
Supply voltage
connection
Diagnostic/status
indicators
Function switch
for LEDs
Labeling field
MAC address
70562003
FL MEM PLUG
2891259
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx