manualshive.com logo in svg

Phoenix Contact FL SWITCH MM HS UM E, User Manual, Page: 259 / 292

Share
Download
Phoenix Contact FL SWITCH MM HS UM E User Manual Download Page 259

FL SWITCH MM HS Virtual Local Area Network (VLAN)

6874_en_16

PHOENIX CONTACT

8-5

8.4.1

Static VLANs

Static VLANs can be created on this web page. Up to 31 new VLANs can be created 

(VLAN 2 to VLAN 32). If more are created, a corresponding message will be displayed.

VLAN 1 is always created statically and all ports are added to it as untagged members. By 

default upon delivery, with "Tagging" VLAN mode activated, network-based management 

interfaces (WBM, Telnet, and SNMP) are only available from VLAN 1. This means that in 

order to access the management interfaces, you must either implement data traffic in 

tagged mode without VLAN tag, where the switch is accessed via ports using the VLAN ID 

or you must use data traffic with VLAN tag, the ID of which is 1. 

Figure 8-3

"Static VLANs" menu

On this web page you can create static VLANs by assigning a VLAN ID and VLAN name. 

The ports are then assigned to the individual VLANs by selecting the relevant VLAN and 

clicking on the character in the "Ports 1-8" line that indicates the current port status. Various 

options are selected by clicking on the status several times. By clicking on "toggle all", all 

available ports in the relevant port group change their status.

The possible states are:

T = Tagged

Ports with "Tagged" status belong to the selected VLAN and packets are sent to this port 

with VLAN tag.

U = Untagged

Ports with "Untagged" status belong to the selected VLAN and packets are sent to this port 

without VLAN tag. An "Untagged" port cannot belong to multiple VLANs - otherwise there is 

no logical division (except VLAN 1).

F = Forbidden

Ports with "Forbidden" status do not belong to the selected VLAN and cannot be added 

dynamically to this VLAN via GVRP.

-

 = None

Ports with "None" status are not integrated into the VLAN.

RSPSupply  -  1-888-532-2706 -  www.RSPSupply.com

http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Summary of Contents for FL SWITCH MM HS UM E





































































































































































































































































































Reviews:

No comments