manualshive.com logo in svg

Phoenix Contact FL SWITCH MM HS UM E, User Manual, Page: 157 / 292

Share
Download
Phoenix Contact FL SWITCH MM HS UM E User Manual Download Page 157

Configuration and diagnostics

6874_en_16

PHOENIX CONTACT

4-77

flWorkTraps

OID

1.3.6.1.4.1.4346.11.11.3

flWorkTrapsDelemeter

OID

1.3.6.1.4.1.4346.11.11.3.0

trapPasswdAccess

trapFWHealth

trapFWConf

trapPowerSupply

trapSecurityPort

trapRstpRingFailure

OID

1.3.6.1.4.1.4346.11.11.3.0.1

Description

Sent to the defined trap receiver on each modification or attempted modification of the de-

vice password and contains information about the status of the last modification or at-

tempted modification.

OID

1.3.6.1.4.1.4346.11.11.3.0.2

Description

Sent on each firmware-related modification to the diagnostic display and contains addi-

tional information about the firmware status. 

OID

1.3.6.1.4.1.4346.11.11.3.0.3

Description

Sent each time the configuration is saved and informs the management station that the 

configuration has been saved successfully. 

This trap is sent in the event of configuration modifications (port name, port mode, device 

name, IP address, trap receiver address, port mirroring, etc.), which are not yet saved per-

manently. The trap also provides a warning that, if not saved permanently, the modifica-

tions will be lost on a reset.

The "flWorkNetIfParamAssignment" object must be set to static (1), otherwise 

objects cannot be written.

OID

1.3.6.1.4.1.4346.11.11.3.0.4

Description

Sent each time the redundant power supply fails.

OID

1.3.6.1.4.1.4346.11.11.3.0.5

Description

Sent each time a disabled MAC address accesses a port.

OID

1.3.6.1.4.1.4346.11.11.3.0.6

Description

Sent in the event of a link interrupt in the redundant RSTP ring.

RSPSupply  -  1-888-532-2706 -  www.RSPSupply.com

http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Summary of Contents for FL SWITCH MM HS UM E





































































































































































































































































































Reviews:

No comments