Phoenix Contact FL SWITCH MM HS UM E User Manual Download Page 14

Page: 14 / 292

FL SWITCH MM HS

1-4

PHOENIX CONTACT

6874_en_16

FL SWITCH MM HS/M

Thanks to certification according to Germanischer Lloyd (GL Certificate No. 2427504 HH),

the FL SWITCH MM HS/M head station, the FL MXT/M extension module, and some of the

available interface modules have been approved for shipbuilding and

off/onshore applications. Please observe the list of GL-certified components on page 12-9.

Please also observe the notes for supply voltage connection on page 2-11.

Extension module

FL MXT

An extension module provides another 8 ports, which can be individually equipped with

interface modules. A maximum of 2 extension modules can be connected to the head

station. The maximum system configuration therefore comprises 24 ports.

FL MXT/M

The FL MXT/M extension module is approved for shipbuilding and off/onshore applications

thanks to its certification according to GL (Certificate No. 2427504 HH).

Interface modules

FL IF ...

Interface modules provide the desired interface to the network. The two outlet directions,

the various types of media supported, and the port density of two ports per interface module

provide a high degree of flexibility in terms of the system configuration.

NOTE:

Always switch off the supply voltage before inserting or removing extension

modules (FL MXT).

Do not connect more than two extension modules (FL MXT) to one head station.

It is not possible to operate the extension modules without the head station.

Please observe the list of GL-certified components on page 12-9.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Summary of Contents for FL SWITCH MM HS UM E





































































































































































































































































































Search results

Summary of Contents for FL SWITCH MM HS UM E

Reviews:

Phoenix Contact FL SWITCH MM HS UM E, User Manual, Page: 14 / 292

Search results

Summary of Contents for FL SWITCH MM HS UM E

Reviews: