Phoenix Contact FL SWITCH MM HS UM E User Manual Download Page 85

Page: 85 / 292

Configuration and diagnostics

6874_en_16

PHOENIX CONTACT

4-5

Information about the device status and redundancy is displayed here. All the messages for

this device are displayed under Messages.

Ports

Figure 4-6

"Ports" menu for the MMS

Comprehensive information, e.g., from interface types and states, through transmission

data to port levels, is displayed here. All information is automatically created and updated.

Trap Targets

Figure 4-7

"Trap Targets" menu

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Summary of Contents for FL SWITCH MM HS UM E





































































































































































































































































































Search results

Summary of Contents for FL SWITCH MM HS UM E

Reviews:

Phoenix Contact FL SWITCH MM HS UM E, User Manual, Page: 85 / 292

Search results

Summary of Contents for FL SWITCH MM HS UM E

Reviews: