Product designation
3-10
PHOENIX CONTACT
6874_en_16
3.3
Starting up interface modules with the MMS
For GL-certified operation, only the interface modules listed in the table below are
permitted.
3.3.1
FL IF 2TX VS-RJ ...
3.3.1.1
Default upon delivery
When the interface modules are inserted, the auto negotiation and auto crossing functions
are activated. Link monitoring for the twisted pair ports is not activated.
3.3.1.2
Functions
–
Auto negotiation
Auto negotiation is a method whereby the switch automatically detects the operating
parameters for the connected network and sets the corresponding parameters
(10 Mbps or 100 Mbps data transmission rate and half or full duplex transmission
mode) for its RJ45 ports. Automatic port setting eliminates the need for manual
intervention by the user. The auto negotiation function can be activated/deactivated via
the web interface.
–
Auto crossing
There is no need to distinguish between 1:1 and crossover cables, as the transmit and
receive cables are crossed automatically.
–
Auto polarity
The polarity is changed automatically by the switch if a pair of twisted pair receive
cables (RD+ and RD-) are connected incorrectly.
Table 3-2
Interface modules with GL approval
Designation
Order No.
FL IF MEM 2TX-D
2832483
FL IF 2FX SC-D
2832425
FL IF 2FX SM SC-D
2832205
FL IF 2TX VS-RJ-F
2832344
FL IF 2TX VS-RJ-D
2832357
Hot plugging
When inserting and removing interface modules, you do
not
have to switch off the supply
voltage. The interface modules are detected automatically and logged to the network
management.
If an interface module is inserted in a MMS that has already been parameterized, the
existing configuration remains active.
Auto crossing is only available if auto negotiation is activated.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx