Phoenix Contact FL SWITCH MM HS UM E User Manual Download Page 287

Page: 287 / 292

Technical data and ordering data

6874_en_16

PHOENIX CONTACT

12-7

12.1.3

Revision history of this manual

Mechanical tests

Shock test according to IEC 60068-2-27

Operation: 25g, 11 ms period,

half-sine shock pulse

Storage/transport: 50g, 11 ms period,

half-sine shock pulse

Vibration resistance according to IEC 60068-2-6

Operation/storage/transport: 5g, 10 - 150 Hz, Criterion 3

Free fall according to IEC 60068-2-32

1 m

Conformance with EMC directives

Noise emission according to EN 55011

Class A

Radio interference field strengths according to EN 55022

Class A

Electrostatic discharge (ESD) according to EN 61000-4-2

Class 3; Criterion B

Electromagnetic fields according to IEC 61000-4-3

10 V/m; Criterion A

Conducted interference

according to IEC 61000-4-6

10 V

RMS

; Criterion A

Fast transients (burst)

according to IEC 61000-4-4

Data lines: 1 kV; Criterion A

Power supply lines: 2.2 kV; Criterion A

Surge voltages according to IEC 61000-4-5

Data lines: ±1 kV asymmetrical; Criterion B

Power supply lines: ±0.5 kV symmetrical/asymmetrical; Criterion B

Differences between this version and previous versions

Version 01: "Spanning Tree" section added; FL IF 2FX SM ... added

Version 02: Technical data for POF interface added

Version 03: Multicast filtering added, data for interface modules revised

Version 04: Extended multicast filtering added, improved handling described for the memory module

Version 05: VLAN and RSTP added, as well as new interface modules and GL certification

Version 06: Supplement for Environmental Category 1 added

Version 07/08: Functions and new features of firmware Version 4.0 and interface modules extended

Version 09: Functions and new features of firmware Version 4.50, interface modules and accessories extended

Version 10: Functions and new features of firmware Version 4.60 and MRP interface module extended

Version 11: Technical modifications

Version 12: Functions and new features of firmware Version 4.70 extended and combined with the MCS manual

Version 13: Hint for IGMP Snooping and new fiber optics added

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Summary of Contents for FL SWITCH MM HS UM E





































































































































































































































































































Search results

Summary of Contents for FL SWITCH MM HS UM E

Reviews:

Phoenix Contact FL SWITCH MM HS UM E, User Manual, Page: 287 / 292

Search results

Summary of Contents for FL SWITCH MM HS UM E

Reviews: