manualshive.com logo in svg

Phoenix Contact FL SWITCH MM HS UM E, User Manual, Page: 252 / 292

Share
Download
Phoenix Contact FL SWITCH MM HS UM E User Manual Download Page 252

FL SWITCH MM HS

7-8

PHOENIX CONTACT

6874_en_16

7.4.1.1

Extended multicast filtering

If IGMP snooping is active, multicast data streams are also detected for which no 

membership reports of possible recipients are registered. For these multicasts, groups are 

created dynamically. These multicasts are forwarded to the querier, i.e., the querier port is 

entered in the group. 

If the switch itself is the querier, these multicasts are blocked.

7.4.2

"General Multicast Configuration" web page

This web page provides global settings for multicast support. Here, IGMP snooping can be 

activated and an aging time can be specified for IGMP snooping information.

Figure 7-4

"General Multicast Configuration" web page

IGMP snooping

In IGMP snooping, the switch passively listens in on the IGMP messages that are sent over 

the network and dynamically creates the appropriate groups. The groups are not saved and 

will be lost during every power down or when the snooping function is switched off.

IGMP snoop aging

IGMP snoop aging is the time period during which membership reports are expected. If this 

time passes without new membership reports being received, the associated port is deleted 

from the groups.

RSPSupply  -  1-888-532-2706 -  www.RSPSupply.com

http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Summary of Contents for FL SWITCH MM HS UM E





































































































































































































































































































Reviews:

No comments