manualshive.com logo in svg

Phoenix Contact FL SWITCH MM HS UM E, User Manual, Page: 254 / 292

Share
Download
Phoenix Contact FL SWITCH MM HS UM E User Manual Download Page 254

FL SWITCH MM HS

7-10

PHOENIX CONTACT

6874_en_16

–

If the switch receives a multicast packet and is still able to create new dynamic multicast 

groups (upper limit not reached) and it has saved one or more ports via which it 

received queries, the switch will

1. create a new multicast group for this multicast address, provided one does not 

already exist and

2. add the port via which it received the multicast packet and all query ports to this new 

group.

–

The multicast groups created as described above are deleted in accordance with the 

timeout rules. For example, if no more membership reports are received, if the 

associated port is deleted from the groups or if no port, other than the ports receiving 

queries, is a member of the group, this group is deleted.

b) The switch is the active querier in the network segment

–

If the switch receives a multicast packet and is still able to create new dynamic multicast 

groups (upper limit not reached) and it has saved one or more ports via which it 

received queries, the switch will

1. create a new multicast group for this multicast address, provided one does not 

already exist and

2. add the port via which it received the multicast packet and all query ports to this new 

group.

–

The multicast groups created as described above are deleted in accordance with the 

timeout rules. For example, if no more membership reports are received, if the 

associated port is deleted from the groups or if no port, other than the ports receiving 

queries, is a member of the group, this group is deleted.

RSPSupply  -  1-888-532-2706 -  www.RSPSupply.com

http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Summary of Contents for FL SWITCH MM HS UM E





































































































































































































































































































Reviews:

No comments